12 Point Air Conditioning Maintenance & Safety Check if applicable

• Examine and adjust the thermostat then
• Scan filters
• Lubricate all moving parts then
• Inspect voltage & amperage to all motors with a meter
• Look for adequate refrigerant charge & leaks
• Check controls then
• Observe all wiring & electrical connection
• Install gauges & check operating pressure
• Check condensate drain
• If the humidifier is on the system, turn it off for the Summer then
• Check condensate drain
• Turn exposed dampers to cooling position

11 Point Heating Maintenance Requirements as stated in your protection plus plan

• Examine and clean filters then
• Inspect flue passageways
• Inspect vent system
• Check main burners for corrosion
• Visual inspection
• Clean flame sensor
• Examine for gas leaks then
• Scan & adjust the thermostat
• Check all controls
• Scanfurnace for cracked heat exchanger
• Examine the complete furnace cycle which then
• Turn exposes dampers to the heating position

Generator Maintenance Contract

Maintenance Includes

1. Overall condition of the unit

• Checking for abnormal noises then
• Leaking fluids
• Excessive vibration following
• Higher than normal operating temperatures
• Unit is level

2. Fuel system and supply line:

• Inspect flexible fuel line then
• Clean all electrical connection points for leaks
• Inspect unit for ear and tightness

3. Electrical connections:

• Inspect connects in the unit and external splice box
• Clean all electrical connection points
• Tighten all electrical points
• Apply anti-corrosion spray to exposed terminal points

4. Test electrical system:

• Start unit and test voltage then begin
• Checking proper voltage
• Examine proper ground
• Inspect proper neutral
• Check proper hertz

5. Charging system and battery function:

• Test internal charger for proper function then
• Clean battery terminals then
• Lubricate battery terminals
• Check battery for proper DC voltage then
• Check battery water levels

6. Engine cooling and lubrication system

• Inspect oil level for excessive loss
• Examine the oil for cleanliness
• Clean air intake louvers
• Clean exhaust ports of debris

7. Engine compartment and shell:

• Clean debris from the inside unit then
• Remove debris from the inside out

NOTE: All listed items will be performed twice a year. The following items are only performed once a year:

• 1. Scan oil and oil filter
• 2. Examine the air filter then
• 3. Change spark plugs
• 4. Adjusting valves for proper motor compression

**All additional maintenance or repairs will be subject to standard service rates.